Skip to content

Toolbox utilities

The Toolbox tab is a set of read-only diagnostics for the RUCKUS APs you administer. Every tool reads live APs over SSH — read-only, nothing on the AP is changed.

What the Toolbox needs

Every tool needs at least one reachable AP over SSH. The APs come from either a selected RUCKUS One venue or manual AP IPs — either source works; RUCKUS One is not required. With no gear connected, the tools can’t run, so the Toolbox instead shows See sample results — a gallery of bundled screenshots of the tools in use.

The tools

Tools come in two shapes: fleet tools run across every connected AP at once; per-AP tools ask you to pick one AP first (or go straight in if there’s only one).

Health & infrastructure

Tool	Shape	What it does
Health check	Per-AP	Read-only triage of one AP — power, uplink, addressing, reachability, SSIDs, stability — graded pass/warn/fail; tap a check for the raw output. (~20 seconds.)
Fleet stability	Fleet	Uptime, panics, recovery boots, flash wear, and silent uplink flaps across every AP.
Wire & power map	Fleet	Per-AP switch, port, VLAN, and PoE draw; flags uplink single points of failure, VLAN mismatches, and slow links.
Path & DNS doctor	Fleet	Pings the gateway and internet, times DNS, and traces the path — answering “is it the Wi-Fi or the uplink?”

Airwaves & clients

Tool	Shape	What it does
Scan clients	Fleet	Every client the APs see — signal, band, link rate, learned IP — with a deep read on tap.
RF advisor	Fleet	Every radio’s channel, measured airtime, and TX power; co-channel conflicts flagged.
Relationship web	Fleet	Which APs hear each other, contend on a channel, or share a BSS colour.
Rogue radar	Fleet	Neighbouring networks and flagged threats from the APs’ intrusion-detection tables.

Per-AP deep dive

Tool	Shape	What it does
Radio scope	Per-AP	One AP’s radios up close — rate/error histograms, per-antenna signal, airtime, latency.
Packet capture	Per-AP	A short packet capture on one radio, pulled over TFTP and analysed on the device.